WBC Haemocue Device Requesting- Operator ID, Patient ID.

  1. Connect the Analyser to the power outlet.
  2. Long press the power button to switch on the device
  3. Navigate to the setting by clicking on the left button and selecting Settings.
  4. Enter the Menu password as 0000.
  5. Navigate by using the left button till you see Patient ID on the screen.
  6. By pressing the middle button, uncheck the Patient ID box.
  7. Navigate to Operator ID, Lab ID, Site ID and Control ID, by pressing the Left button while unchecking the boxes by pressing the middle button.
  8. On the Last stem, check the Audio box by clicking the middle button.
  9. Thereafter, enter the passcode as 0000 and click the left button to exit the settings mode.