How do I clean the Test Strip Holder?

1. Remove the Test Strip Holder by pressing in on middle of the Test Strip Holder and sliding it out from the meter as shown below.
   
2. Wipe it down with a damp cloth, or a mild detergent.
3. Dry the meter with a dry and soft cloth.
4. Slide the Test Strip Holder back into the meter by laying it flat on the meter.
5. Firmly press down on the center of the Test Strip Holder with your thumb and push it in until it clicks into place.
6. Avoid using organic solvents, such as gasoline or paint thinner. This will cause damage to the meter