How do I clean the Meter Sensor Area?
- Remove the Test Strip Holder by pressing in on middle of the Test Strip Holder and sliding it out from the meter.
- Wipe down the Meter Sensor Area with a cotton swab as shown below.
![](https://lh4.googleusercontent.com/QlVDHOFd810Ed654HAYrVcdnRekkacSkDPyOSNEclWE8PqW90yF_i8yaga-G7nSf-I84ALY3YaDfktfWkWjzqv5Kt2u8gQZmrcg-AmH4KzrpK4zyj8VscOwPE_PvcAIoxnK4X5hc)
- Afterwards, firmly press down on the center of the Test Strip Holder with your thumb and push it in until it clicks into place
- Ensure you do not scratch the transparent plastic covering the sensor.
- Avoid using bleach or alcohol to clean the Meter Sensor Area. This will cause damage to the meter.