How to clear the HGB Bubble Alarm.

Perform the following steps.

  1. Click on Menu>Service>Special>Input Password(6868)>Detect window>HGB-VAL.
  2. Click ‘R’ button and check the HCG-VAL  value. It should be around 3300 ± 100.
  3. If the value is lower than 3300, increase HGB value and click ‘W’ to save the new parameter.
  4. Click the ‘R’ button again to check the HGB-VAL value again.
  5. If HGB-VAL value is still not within range, repeat step 3 until HGB-VAL is in range.