Hemocue WBC Device Requesting Operator ID and Patient ID.

  1. Switch on the device.
  2. Navigate to the Setting icon.
  3. Enter Menu passcode as 0000.
  4. Navigate left using the button on the left till Patient ID.
  5. Make sure the boxes on Patient ID, Operator ID, Lab ID, Site ID and Control ID are Unchecked by pressing the middle button.
  6. Then make sure the audio box is checked by pressing the middle button.
  7. Thereafter, pressing the left button till the end. 
  8. Enter passcode as 0000 then proceed by clicking the left button.